3D Printer Silk Like PLA Filament
Silk-like is made out of polymer composites material. It has every feature of PLA resin, but additionally combines characters of additives, gorgeous surface, nature and unique textures. And coupled with our premium raw material, transcend industry standard accuracy and orderly wrap, maximize to enjoy the fun of smooth print.
Spool N.W: 1kg
Filament: 1.75mm silk like PLA
Box size: 21 * 21 * 7.5 cm
Package details: vacuum sealed, individual box, master carton
*PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
*High strength, better toughness, low odor, no warping
*Smoothly print,wrapped orderly, melt well, feed smoothly and constantly without clogging the nozzle or extruder.
*Diameter Accuracy can be controlled within ±0.05 mm
*Degradation rate can reach 100%, do no harm to environment.
1. Printing temperature: 200-220℃
2. Heated bed: 50-60℃
3. Speed: 50-100 mm/sec
General printing tips:
1. It’s better to use 4 mm or larger nozzle. Low print speed is recommended.
2.Change the nozzle before printing is good way to reduce jam.
3.Finding perfect gap between nozzle and print platform is important to get nice prints. We prefer place A4 paper between gap, if can pull out paper intact with some strength, then it is perfect height.
4.PLA Filament adheres well to acrylic and blue painter’s tape,we prefer use blue tape on the build plate with no raft.
5.Place remitting filament back to original vacuum bag and stock them in a cool and dry place after print. Filament can absorb moisture from air and affect its quality and performance.
6.Better to release filament to original status after print,keep it bend at certain degree on your printer may cause break for next print.